Schedule Your Job Now

 

What are your insights and beliefs on No Hot Water — Water Heater Repair?

Several contemporary houses use an electrical water heater for their heating unit, as a result of its ease and simplicity of use. However, just like any other electrical devices, troubles might occur with its usage, suddenly. It can be truly aggravating to wake up to a cool shower as opposed to a warm one or having your bath with water that isn't hot enough or perhaps as well hot. Whatever the instance might be, hot water heater problems can be quite aggravating. The good news is, we have actually made a listing of possible options to your water heater problems. There are a number of elements that might cause a lot of these issues, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you switch off the main power supply for security. Whatever the problem is, getting it taken care of must not present excessive of an issue if you comply with these steps:

 

Call A Specialist:

If after replacing all damaged components and resetting your temperature level, the water heater still isn't working, you might need to call an expert plumber for a specialist viewpoint. The problem with your heating system could be that the hot and cold faucets have been switched over or it might be undersized for the amount of warm water required in your house. Whatever the instance might be, an expert plumber would assist address the issue.

 

Inspect Your Power Supply:

As standard as this may appear, it is extremely essential. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power issue. Check if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the concern, just transform it off and on once again. Change any damaged or damaged fuse. Examine the appliance with power after these modifications to see if it's currently working.

 

Examine Your Thermostat:

If your water heater still isn't working or the water coming out isn't warm sufficient, you may need to inspect the temperature level setups on your upper thermostat. Make certain the circuit breaker is switched off before doing anything. Open up the accessibility panel and also press the red button for temperature reset above the thermostat. This must help heat up the water. Transform the breaker back on and inspect if the issue has actually been resolved.

 

Inspect the Burner in the Water Heater:

If it's not a power issue, after that attempt having a look at your burner if it is still functioning. Test each of your heating elements to make sure the trouble isn't with any one of them. If any of them is malfunctioning, change that component and afterwards examine whether the warm water is back on.

 

Conclusion

Water heater problems are not always significant. Many of them are due to minor issues like a blown fuse or worn-out heating element. Changing the damaged components should do the trick. Nevertheless, if you are still not able to resolve the issue, give a call to your closest plumber to find to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you enjoyed our article about Hot Water Heater Repair. Thanks for taking a few minutes to read through our piece of content. Enjoyed our content? Please share it. Help another person check it out. We cherish reading our article about How to Troubleshoot and Repair an Electric Water Heater.

Plumbing emergency? We're ready.